Five-axis linkage machining center, also known as five-axis machining center, is a kind of machining center with high technology content and high precision, which is specially used for machining complex surfaces. This machining center system has a decisive influence on a country's aviation, aerospace, military, scientific research, precision instruments, high-precision medical equipment and other industries.
Five-axis linkage CNC machining center system is the only means to solve the machining of impeller, blade, marine propeller, heavy-duty generator rotor, steam turbine rotor, large diesel engine crankshaft, etc. Five-axis linkage machining center has the characteristics of high efficiency and high precision, and the workpiece can complete complex machining with one clamping.
It can adapt to the processing of modern molds such as auto parts and aircraft structural parts. There is a big difference between five-axis machining center and pentahedron machining center. Many people do not know this and mistook the pentahedron machining center for the five-axis machining center. The five-axis machining center has five axes, namely, x, y, z, a and c, and the xyz and ac axes form five-axis linkage machining.
It is good at spatial surface machining, special-shaped machining, hollowing, drilling, oblique hole, oblique cutting, etc. The "pentahedron machining center" is similar to the three-axis machining center, but it can do five faces at the same time, but it can't do special-shaped machining, oblique hole drilling, cutting bevel, etc.
General Parameters
Transverse X-axis ≥ 2440 mm or ≤ 2440 mm
Longitudinal Y axis ≥ 1200 mm or ≤ 1220 mm
Vertical Z axis ≥ 750 mm or ≤ 750 mm
Axis A+/- 100 °
C-axis+/- 225 °
Maximum axis movement speed:
X-axis 26 m/min; Y-axis 60 m/min; Z axis 15m/min
Main shaft power of double swing head 7.5 kW - 15KW
Post time: Feb-27-2023